Nearer-to-Zero Emissions Achieved for City Bus Operations

STOCKHOLM, Sweden (June 7, 2019)— Cummins is ready to meet the next step of Euro VI emissions control with clean diesels now certified to the more stringent Phase-D regulation, following a two-year development and test programme. The B4.5, B6.7 and L9 engines with a 150 to 400 hp (112-298 kW) range for bus and coach applications will move to full production status at the Cummins Darlington facility in the UK before Phase-D takes effect on Sept. 1, 2019.

Introduced by Cummins at the UITP Global Public Transport Summit taking place in Stockholm, Sweden (June 9-12), the Euro VI Phase-D engines achieve nearer-to-zero emissions, representing an incremental step towards Euro VII regulations, 2019 B4.5 hybrid Phase-Danticipated to take effect after 2025.

The Phase-D regulations are particularly relevant for bus operations, as they focus on tighter control limits for Oxides of Nitrogen (NOx) emissions during lower speed city operations, as well as under cold engine start conditions. In addition to emissions test cell verification, the Phase-D regulations require on-road testing to capture real-world measurement. Duty cycle-based testing using high precision Portable Emissions Measurement systems (PEMs) installed on Cummins-powered buses has indicated a 25 percent reduction in NOx emissions, compared to the Phase-A engines when Euro VI was first introduced in 2015.

“With exceptionally low NOx emissions, our latest Phase-D products will help bus fleets improve air quality and align with the recent arrival of the London Ultra Low Emission Zone and other Clean Air Zones being established in cities across Europe,” said Ashley Watton, Cummins Director — On-Highway Business Europe.

“To achieve Phase-D certification we focused on the emissions control logic and developed a new algorithm for the management system. By refining and retesting the software over a two-year period, we were able to avoid making any hardware change to the engine or exhaust aftertreatment.

“Phase-D development work required a substantial investment by Cummins, but it does mean our customers retain the benefit of a proven product with identical performance to those they experience today. In terms of vehicle integration, this is no need to re-engineer the Euro VI installations as our Phase-D engines offer a seamless, drop-in solution,” added Watton.

The nearer-to-zero emissions benefit of Phase D certification will extend to the hybrid-adapted versions of the widely used Cummins B4.5 and B6.7 engines, continuing to help bus manufacturers across Europe on the road to electrification and fleet decarbonization. When integrated within a diesel-electric driveline, the 4.5- and 6.7-litre clean diesels can reduce fuel consumption and related CO2 emissions by as much as 33 percent.

For conventional diesel bus drivelines, Cummins engines featuring Stop/Start technology will also move forward to Phase-D, saving fuel and greenhouse gas emissions by virtually eliminating engine idling at bus stops.>

Enhanced Euro VI

Since the initial Phase-A introduction of the Euro VI regulations, Cummins engines have undergone continuous improvement to meet successive Phases with more advanced emissions control technology. The current Phase-C engines, introduced in 2016, were also upgraded with enhanced power output and torque.

The 4-cylinder B4.5 with up to 210 hp (157 kW) output improved vehicle responsiveness with an increase in both low-end and peak torque from 760 to 850 Nm. The 6-cylinder B6.7 upped the top rating to 300 hp (224 for bus, with peak torque 2019 B6.7 Euro 6 Phase-Dincreased to 1200 Nm available at just 1000 rpm. The highest bus rating of the L9 increased from 330 to 370 hp (239-276 kW) with an impressive rise in peak torque up to 1600 Nm.

Enhanced engine robustness results from upgraded components, as well as improved operation of the DPF-SCR aftertreatment, based on experience gained from a Cummins powered Euro VI population approaching 25,000 buses in-service.

As Cummins hybrid-adapted expertise and clean diesel optimization work continues to progress, this will provide operators with the energy choice they need alongside natural gas, battery-electric and other emerging technologies from Cummins.

About Cummins Inc.

Cummins Inc., a global technology leader, is a corporation of complementary business segments that designs, manufactures, distributes and services a broad portfolio of power solutions. The company’s products range from diesel and natural gas engines to hybrid and electric platforms, as well as related technologies, including transmissions, battery systems, fuel systems, controls, air handling, filtration, emission solutions, and power generation systems. Headquartered in Columbus, Indiana (U.S.), since its founding in 1919, Cummins employs approximately 62,600 people committed to powering a more prosperous world through three global corporate responsibility priorities critical to healthy communities: education, environment and equality of opportunity. Cummins serves customers in approximately 190 countries and territories through a network of approximately 600 company-owned and independent distributor locations, and over 7,600 dealer locations. In 2018, the company earned about $2.1 billion on sales of $23.8 billion.

See how Cummins is powering a world that’s Always On by accessing news releases and more information at https://www.cummins.com/always-on. Follow Cummins on Twitter at www.twitter.com/cummins and on YouTube at www.youtube.com/cumminsinc.

CONTACT: Kevan Browne

Cummins Inc.

Tel: +44 (0)7718 581313

Email: kevan.browne@cummins.com